Glaze On handmade iron-on Phish patch

  • $12.00
Shipping calculated at checkout.

Only 5 left!

This simple Jon Fishman donut patch was inspired by the 13 residency at MSG this past summer. Handmade using solid navy cotton scrap fabric with lots of little red donuts embroidered inside and outlined with navy embroidery thread. This patch can be ironed on (be careful not to get the tie dye too wet, it could bleed) - I do recommend stitching it on as well (see below for adhering instructions).

Approximately 3.75" x 3.75"

**Each patch is unique, style may vary**

**WANT IT IN A DIFFERENT COLOR? I am a fabric-aholic and have a YUGE fabric stash - just convo me if you want to switch up the colors :)

NEED MORE THAN ONE? Convo me and I’d be happy to make more!

Convo me with any questions

*Designs are created on a Husqvarna Embroidery Machine using original embroidery designs by me. Colors of patches/appliques may vary from the images pictured in the listing*

TO ADHERE:
1. Preheat your iron - HIGH HEAT
2. Place the patch with the sticky side down onto the garment. Make sure it is exactly where you want it to be. Cover it with a damp cloth.
3. Place the iron onto the design and press firmly. Move the iron around the design area for about 30 seconds.
4. Remove the damp cloth and check the patch, If there are still parts that did not adhere repeat the steps above*.
5. Let the patch dry completely before stitching around the edges (a straight stitch or zig-zag stitch works best)

*NOTE* the patch may not adhere properly to all surfaces, especially canvas or thicker fabrics.

NEED MORE THAN ONE? CONVO ME AND I'D BE HAPPY TO MAKE YA MORE!


We Also Recommend